PHP 8.3.4 Released!

インストール

このセクションでは PHP のインストール方法に関する一般的な質問を扱います。 PHP は、ほとんど全ての OS とウェブサーバーで 利用可能です。

PHP をインストールするには、インストールと設定 の指示に従ってください。

  1. なぜ、Apache 2 のマルチスレッド MPM モードを実運用環境で使用するべきではないのですか?
  2. Unix/Windows: php.ini ファイルはどこに置けばよいのですか?
  3. Unix: PHP をインストールしましたが、ファイルをロードするたびに 'Document Contains No Data(ページが表示できません)' という メッセージが表示されます。何が起こっているのですか?
  4. Unix: RPM を使って PHP をインストールしたのですが、Apache が PHP のページを 処理してくれません。何が起こっているのですか?
  5. Unix: Apache に FrontPage 拡張モジュールのパッチを当てたら、突然 PHP が動作しなくなってしまいました。PHP は Apache の FrontPage 拡張モジュールと共存することはできないのですか?
  6. Unix/Windows: PHP をインストールしたのですがブラウザから PHP スクリプトにアクセスしても何も表示されません。
  7. Unix/Windows: PHP をインストールしたのですがブラウザから PHP スクリプトにアクセスすると Internal Server Error 500 となってしまいます。
  8. PHP をインストールするまではエラーもなく問題なく進んだのですが、 Apache を起動させようとすると undefined symbol エラーが発生します。 [mybox:user /src/php5] root# apachectl configtest apachectl: /usr/local/apache/bin/httpd Undefined symbols: _compress _uncompress
  9. Windows: PHP をインストールしたのですがブラウザから PHP スクリプト にアクセスすると次のようなエラーが出力されます。 cgi error: The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
  10. Windows: 全ての説明に従っているのに PHP が IIS で動作しません!
  11. IIS, PWS, OmniHTTPD, Xitami上でCGIとしてPHPを実行するとき、 次のようなエラーが出る:Security Alert! PHP CGI cannot be accessed directly.
  12. php.ini が認識され読み込まれていることをどうやって知ることが できますか? 自分の行った変更が反映されてないらしいのですが。
  13. Windows で PHP のディレクトリを PATH に追加するにはどうすればいいのですか?
  14. Windows 上の PHP で、php.ini を使えるようにするにはどうしたらいいのですか?
  15. Apache のコンテントネゴシエーション(MultiViews オプション)を PHP で使用することはできますか?
  16. PHP が処理できるリクエストメソッドは GET および POST だけなのですか?
なぜ、Apache 2 のマルチスレッド MPM モードを実運用環境で使用するべきではないのですか?

PHP はグルー(糊)です。このグルーは、多くのサードパーティ製のライブラリを くっつけることによりクールな Web アプリケーションを構築するために使用され、 直観的で簡単に習得できる言語インターフェイスにより、一つの整合性のある実体として 見せることができます。 PHP の柔軟性と力は、プラットフォームの安定性と堅牢性に基づいています。 グルーによる結合をするためには、OS や Web サーバー、サードパーティ製のライブラリが必要です。 これらの一つの機能が停止した場合、PHP は問題を特定し、速やかに修正する 手段が必要です。 実行スレッドを完全に分離しなかったり、 メモリセグメントを完全に分離しなかったり、 各リクエストで使用される強力なサンドボックスを有さないことで、 基本的なフレームワークをより複雑なものにした場合、 PHP のシステムに弱点が生まれます。

マルチスレッド MPM を使いたい場合は、 PHP が自分のメモリ空間で実行される FastCGI の設定をみてください。

Unix/Windows: php.ini ファイルはどこに置けばよいのですか?

UNIX の場合、デフォルトでは /usr/local/lib です。コンパイル時に --with-config-file-path オプションを使用してこの場所を変えたいという人も多いでしょう。 例えばこのようにすることも出来ます:

--with-config-file-path=/etc
そしてディストリビューションの php.ini-development/etc/php.ini にコピーし、環境に合うように 編集してください。

--with-config-file-scan-dir=PATH

Windows の場合、php.ini のデフォルトパスは Windows ディレクトリになります。 Apache ウェブサーバーを使っている場合はまず Apache がインストールされているディレクトリ (例えば c:\program files\apache group\apache にある php.ini を探そうとします。このため、異なる php.ini ファイルを異なるバージョンの Apache ごとに置いておくことができます。

設定ファイルの章も参照ください。

Unix: PHP をインストールしましたが、ファイルをロードするたびに 'Document Contains No Data(ページが表示できません)' という メッセージが表示されます。何が起こっているのですか?

これはおそらく PHP に何らかの問題が起こっていてコアダンプしている という状態です。サーバーのエラーログを見てこのケースかどうかチェック してください。そして小さなテストケースで問題を再現させてみてください。 もし 'gdb' の使い方が分かるならバグレポートに加えてバックトレースを 提供してもらえると開発者が問題の箇所を突き止めるのに 非常に役立ちます。もしあなたがPHPをApacheモジュールとして使用している 場合は以下のようにします:

  • httpd を停止します

  • gdb httpd

  • Stop your httpd processes

  • > run -X -f /path/to/httpd.conf

  • ブラウザから問題のある URL にアクセスします

  • > run -X -f /path/to/httpd.conf

  • もしコアダンプが発生すると gdb が知らせてくれます

  • bt とタイプします

  • このバックトレースをバグレポートに含めてください。バグレポートは » https://github.com/php/php-src/issues から送信してください。

もしそのスクリプトが正規表現関数 (preg_match() やその類似関数) を使用している場合、 PHP と Apache が同じ正規表現のパッケージを使用してコンパイルされているかどうかを確認してください。 PHP と Apache 1.3.x を使用している場合は常に確認が必要です。

Unix: RPM を使って PHP をインストールしたのですが、Apache が PHP のページを 処理してくれません。何が起こっているのですか?

あなたが Apache と PHP の両方を RPM でインストールしたとすると、以下に示す 内容の一部もしくは全てを httpd.conf ファイルに追加するか、コメントを 外す必要があります:

# Extra Modules
AddModule mod_php.c
AddModule mod_perl.c

# Extra Modules
LoadModule php_module         modules/mod_php.so
LoadModule php5_module        modules/libphp5.so
LoadModule perl_module        modules/libperl.so
そして以下の行:
AddType application/x-httpd-php .php
以上の内容を全体設定、もしくは PHP サポートを追加したいバーチャル ドメインの設定に加えてください。

Unix: Apache に FrontPage 拡張モジュールのパッチを当てたら、突然 PHP が動作しなくなってしまいました。PHP は Apache の FrontPage 拡張モジュールと共存することはできないのですか?

いいえ。PHP は FrontPage 拡張モジュールと問題なく共存できます。 問題は FrontPage 拡張モジュールのパッチが PHP が依存している Apache の 構造の一部を変更してしまうことにあります。パッチを当てた後で PHP を再コンパイル('make clean; make' としてください)すれば問題は 解決されます。

Unix/Windows: PHP をインストールしたのですがブラウザから PHP スクリプトにアクセスしても何も表示されません。

ブラウザの「ソースの表示」を実行してください。おそらく PHP の ソースコードが表示されると思います。これはウェブサーバーがスクリプトを PHP に渡していないためスクリプトが実行されていない、ということを 意味します。サーバー側の設定のどこかが間違っているはずですので、 PHP インストールマニュアルに従って再度入念に設定を確認してみてください。

Unix/Windows: PHP をインストールしたのですがブラウザから PHP スクリプトにアクセスすると Internal Server Error 500 となってしまいます。

ウェブサーバーが PHP を実行するときに何らかの問題が起きています。 どんなエラーが起こっているか確認するために、コマンドラインで PHP 実行ファイル(Windows では php.exe) のある ディレクトリに移動して php -i を実行してください。 もし PHP の実行時に問題があった場合は適切なエラーメッセージが表示されるので、 それを手がかりに次に何をすべきかを知ることができます。画面 一杯に HTML(phpinfo() 関数の出力)が表示された場合には PHP は問題なく動作していますので、問題はウェブサーバーの設定 にあるはずです。再度入念にチェックしてみてください。

PHP をインストールするまではエラーもなく問題なく進んだのですが、 Apache を起動させようとすると undefined symbol エラーが発生します。
[mybox:user /src/php5] root# apachectl configtest
 apachectl: /usr/local/apache/bin/httpd Undefined symbols:
  _compress
  _uncompress

これは、PHP とは関係なく MySQL クライアントライブラリの問題です。 このライブラリのうちある種のものは --with-zlib を指定する必要がありますが、 他のものは必要ありません。この問題は MySQL FAQ でも扱われています。

Windows: PHP をインストールしたのですがブラウザから PHP スクリプト にアクセスすると次のようなエラーが出力されます。
cgi error:
 The specified CGI application misbehaved by not
 returning a complete set of HTTP headers.
 The headers it did return are:

このエラーメッセージは PHP が(何らかの理由で)何も出力できなかった ことを意味します。詳細なエラーメッセージを得るためには、 コマンドラインから PHP 実行ファイル(Windows では php.exe)のあるディレクトリに移動して php -i を実行してください。もし PHP の実行時に問題 があった場合は適切なエラーメッセージが表示されるのでそれを 手がかりに次に何をすべきかを知ることができます。画面一杯に HTML (phpinfo()関数の出力) が表示された場合には PHP は問題なく動作しています。

PHP がコマンドラインで動作したなら、再度ブラウザから PHP スクリプトに アクセスしてみてください。もしまだ失敗するようなら以下のいずれかの 理由によるものと思われます。

  • PHP スクリプト、 php.exephp5ts.dllphp.ini もしくはロードしようとしている PHP 拡張モジュールの ファイルパーミッションが匿名インターネットユーザー IUSER_<machinename> にアクセスできない ものになっている。
  • スクリプトが存在しない(もしくはあなたが在ると思っている場所と ウェブサーバーのルートディレクトリからの相対位置がずれている)。 IIS を使用している場合は、Internet Service Manager でスクリプト マッピングを設定するときに「ファイルの存在を確認する」にチェックを することでこのエラーをトラップすることができます。もしスクリプト ファイルが存在しない場合はサーバーが代わりに 404 エラーを返すように なります。これにはもう一つ利点があります。それは IIS が スクリプトファイルの NTLanMan パーミッションに応じて認証を要求する ようになる、ということです。
Windows: 全ての説明に従っているのに PHP が IIS で動作しません!

PHP スクリプトを実行しようとするあらゆるユーザーが php.exe の実行権限を必要としているということを 忘れないでください。IIS はインストール時に追加された匿名ユーザーを使用 します。このユーザーに対して php.exe の実行権限が 必要です。また、認証された全てのユーザーに関しても php.exe の実行権限が必要です。IIS4 の場合はさらに PHP がスクリプトエンジンであるということを教えてやる必要があります。 この FAQ も読んでください。

IIS, PWS, OmniHTTPD, Xitami上でCGIとしてPHPを実行するとき、 次のようなエラーが出る:Security Alert! PHP CGI cannot be accessed directly.

cgi.force_redirect0 をセットしてください。デフォルトでは 1 にセットされていますので、そのディレクティブが ; でコメントアウトされていないことを確認してください。 他のディレクティブと同様にこれは php.ini 上でセットされます。

デフォルトは 1 なので、100% 正しく php.ini ファイルが 読み込まれているかどうかが重要です。 詳細はこの FAQ を 読んでください。

php.ini が認識され読み込まれていることをどうやって知ることが できますか? 自分の行った変更が反映されてないらしいのですが。

php.ini とそれが PHP に読み込まれているかを確認するには phpinfo() をコールして最初のほうに 表示されている Configuration File (php.ini) を見てください。これは PHP が認識している php.ini と、それが 読み込まれているか否かを示しています。ディレクトリパスだけが 表示されている場合は、読み込まれていないということなので、 そのディレクトリに php.ini を置いてください。 php.iniPATH にある場合それが読み込まれます。

php.ini が読み込まれていてかつ PHP をモジュールとして実行 している場合、php.ini を変更した後で必ず Web サーバーを 再起動してください。

php_ini_loaded_file() も参照ください。

Windows で PHP のディレクトリを PATH に追加するにはどうすればいいのですか?

Windows では、以下のようにします。

  • コントロールパネルのシステムアイコンを選択します(スタート → コントロールパネル)。

  • 詳細設定タブに移動します。

  • 「環境変数」ボタンを押します。

  • 「システム環境変数」欄を見ます。

  • Path というエントリを見つけます(スクロールする必要があるかもしれません)。

  • Path のエントリをダブルクリックします。

  • その最後に ';' と追加し、その後に PHP のディレクトリを追加します (例: ;C:\php)。

  • OK を押します。

注意: 上の作業を行った後は、必ずコンピュータを再起動し、 PATH の変更が適用されていることを確認しましょう。

Windows 上の PHP で、php.ini を使えるようにするにはどうしたらいいのですか?

いくつかの方法があります。Apache を使用しているのなら、 Apache のドキュメントを参照ください。 それ以外の場合は、環境変数 PHPRC を指定する 必要があります。

Apache のコンテントネゴシエーション(MultiViews オプション)を PHP で使用することはできますか?

もしリンクする PHP ファイルが拡張子を持っているなら、すべては うまく動作します。この FAQ が対象としているのは、リンクする PHP ファイルが拡張子を持っておらず、拡張子のない URL から PHP ファイルを判別するためにコンテントネゴシエーションを使用する方法です。 この場合、AddType application/x-httpd-php .php という行を以下のように変更します。

AddHandler php5-script php
AddType text/html php
この方法は、Apache 1 ではうまく動作しません。なぜなら PHP モジュールが php-script をキャッチできないからです。

PHP が処理できるリクエストメソッドは GET および POST だけなのですか?

いいえ、それ以外のいかなるメソッド(例: CONNECT)でも扱えます。 適切な応答ステータスは、header() を使用して送信可能です。 GET および POST だけを処理したいなら、Apache の設定を以下のようにします。

<LimitExcept GET POST>
Deny from all
</LimitExcept>

add a note

User Contributed Notes 19 notes

up
16
per dot fikse at ipj dot no
18 years ago
Installing PHP 4 or 5 on Windows Server 2003 x64 results in http error 505. This is not a PHP bug. It is due to running a 32-bit ISAPI DLL under the 64-bit version of IIS 6, as documented here: http://support.microsoft.com/?id=895976

Solution: Flip the Metabase flag for Enable32bitAppOnWin64 as described in http://support.microsoft.com/?id=894435 ,
like this: CSCRIPT ADSUTIL.VBS SET W3SVC/AppPools/Enable32bitAppOnWin64 1

(Alternatively with full path: cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1)
up
6
nigel dot salt at hotmail dot com
20 years ago
Finally got IIS 5 and PHP 5 to talk.

What worked for me was:

1) Set
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
W3SVC\Parameters\Script Map]
".php"="your path to php\\php.exe"

2) ensure there is not a php.ini in the windows system folder and that there is one wherever you've put PHP

3) edit php.ini and set cgi force redirect to 0 and cgi.rfc2616_headers = 1

4) Put the PHP scripts in their own folder underneath the inetpub root

5) Open the IIS console, right click your new php folder
In the Directory tab
set application name to the name of the folder
set executable and script as permission
set application protection to low
Click configuration and check that .php is mapped to wherever you put
PHP

Restart IIS

Try a very simple PHP page and it should work

Nigel
up
8
ssaxena at nriol dot com
14 years ago
Here are my struggle to get PHP 5.2.12 working on Windows XP SP3, IIS 5.1 (Please note Win XP SP3 has issue of FastCGI)

1. Dowloaded installer and installed in C:\Program Files\PHP as ISAPI module

---->Did not work

Added php5isapi.dll in ISAPI Filter and added the extension .php in Home Dir->Configuration
(For every setting change restarted IIS on cmd->iisreset)

---->Did not work

(And the Google was pointing to the Fast CGI issue; Don't know why microsoft has MS-FAST ! )
Uninstalled the PHP and cleaned up the folders, PATH environment variable & PHPRC, the IIS settings and registry entries and shut down(restart is different from shut down) the system to make it very clean

2. Reinstalled the PHP in C:\PHP as ISAPI and did the same as above in IIS
(For every setting change restarted IIS on cmd->iisreset)

---->Did not work

Uninstalled and cleaned up same as above and took a breath to make sure what I am doing wrong.
Shutdown the system.

3. Unzipped the php-5.2.12-Win32.zip and did the same as above (this time manually PATH variable and security permission for the PHP folder and following settings)

short_open_tag = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
doc_root = "C:\Inetpub\wwwroot"
extension_dir = "C:\PHP\ext"
cgi.force_redirect = 0

---->Did not work

Uninstalled and cleaned up same as above
Shutdown the system.

4. Downloaded Microsoft Web Platform Installer 2.0 and select the PHP+Fast CGI+Windows Cache for PHP extension and Web Deployment Tools
restarted the system to take effect the settings

---->Did not work

Uninstalled and cleaned up same as above
Shutdown the system

5. Took the prev version of PHP php-5.2.4-Win32.zip unzip the folder and did the following changes:

short_open_tag = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
doc_root = "C:\Inetpub\wwwroot"
extension_dir = "C:\PHP\ext"
cgi.force_redirect = 0

set the security permission as IIS_machinename with full access to the C:\PHP folder

------->IT GOT WOKRING

Hope people would be aware of php-5.2.12 and would love the php-5.2.4
up
5
charleslynch at xybersoftware dot com
15 years ago
One final note to the message below if you are getting the message about not having rights to execute...You need to use IIS right click on the website and choose 'Properties/Home Directory' then on the 'Execute Permissions' combo box you need to choose 'Scripts only'...Click ok...another dialog may appear asking which directories to apply the action too...choose any directories that you intend on using php in and click ok...It should work now...
up
5
JUSTANOTHERUSER
18 years ago
<LimitExcept GET POST>
Deny from all
</LimitExcept>

Does not work with Apache2+ & PHP5 . Apache Refuses to start
up
6
jimo at mail dot azhsv dot com
20 years ago
PHP 4 and IIS 6.0 (Windows Server 2003)

Had difficulty getting PHP 4.3.3 to work with Win2003 Ent Server for use with SquirrelMail. Problem found and believed solved. Appears to be something New with IIS 6.0 (More security by Micro$oft) Was getting 404 error and php was not being run as a cgi even though it was in extensions and IIS user had rights to execute it. (php from command line operated correctly)

If you are installing on Windows Server 2003 (only have Enterprise Edition ? Not sure if this applies to standard edition), and you have done the normal procedures for inclusion of PHP scripts (either ISAPI or CGI) in IIS, you will still get a 404 error when attempting to execute those scripts even though IIS has rights and the extension points to the correct file. To alleviate this problem, perform the following:

1. Open a command prompt window
2. Change to C:\windows\system32
3. Execute the command: cscript iisext.vbs /AddFile c:\php\php.exe 1 php 0 php
4. Execute the command: cscript iisext.vbs /EnFile c:\php\php.exe
5. To check for correct execution of the above,
6. Execute the command: cscript IisExt.vbs /ListFile ? the php extension should be listed

If you try just step 4 without step 3 you get an error that the file is not in the list (and won?t be there till you do step 3 above)

After this, IIS seems to like the php extension and work normally.

For additional reference, see the below 3 Micro$oft KB Articles:
HOWTO: Enable and Disable ISAPI Extensions and CGI Applications in IIS 6.0 (MS KB Article 328360)

HOWTO List Web Server Extensions and Extension Files in IIS 6.0 (MS KB Article 328505)

HOWTO Add and Remove Web Service Extension Files in IIS 6.0 (MS KB Article 328419)
up
5
scott at chaisson dot net
16 years ago
Windows 2000 Server and IIS (SP4 and all patches):

After many frustrating hours of trying to figure out the install (again), It took a while, but here are a couple tips:

PHP working with IIS uses c:\winnt\php.ini

It doesn't matter what you set the path to, nor what you set the PHPRC environment variable to. After you get PHP running correctly in the installation folder (using php -i) copy the php.ini file into the c:\winnt folder.

Here's what worked for me:

- Add PHP path to System environment variable

- Add php5activescript.dll from http://snaps.php.net/ to the PHP folder, then Register it: "regsvr32 php5activescript.dll"

Set extension_dir and doc_root directives in PHP.INI:
extension_dir = C:\WWW\PHP\ext
doc_root = C:\WWW\Site
cgi.force_redirect = 0

(the last cgi.force_redirect isn't required, but I like to set it anyway)

Copy the .INI file into WINNT folder

In IIS Manager, right-click "Default Web Site", Click "Home Directory",
Click "Configuration", "Add" the ISAPI application:
Executable: <your php install>\php5isapi.dll
Extension: .php
Limit to: GET,HEAD,POST
Check: "Script Engine"
Uncheck: "Check that file exists"

Finally: Set up an ISAPI filter:
Click the "ISAPI Filters" tab,
Filter Name: PHP
Executable: <your php install>\php5isapi.dll

Notes: You don't have to set any of your folders as "Script source" folders. .PHP files aren't scripts, merely text files that require processing before being shipped off to the browser, which is what the ISAPI filter does.

Finally, working again.

Chase
up
6
emzeperx at emzeper dot hu
18 years ago
You do not have to restart the whole system make effect of changing the PATH env var. For me (sbs2003) worked automatically.
on older systems you can use

set $Path=%path%;c:\php

command to extend immediately the path var.
up
6
knutw at sparhell dot no
17 years ago
I recntly upgraded from PHP 5.1 to 5.2 on my Windows Server 2003 using IIS6. I selected CGI as before. My PHP folder is as always C:\Program Files\PHP. I also edited my brand new php.ini, enabling all my old extensions and recommended settings for IIS. I like not to keep my old config into a new version.

After upgrade, I just got blank pages in my browser, and the response status was 404 Not found.

I checked my installation twice, using this FAQ, but got no way.

Then I went to IIS Manager, Web Service Extensions. The php Service Extension was Allowed as it should. I deleted the Service Extension and added it. The old extension used short file names containing tilde (PROGRA~) character, but I don'æt know if that gas anything to do with the problem. Anyway, after allowing my" new" Service Extension, pointing to php-cgi.exe as before, mye web sites suddenly worked. So will revommend anyone with thos problem to delete and add the Servcie Extension. It didn't help re-allowing it, restarting IIS or the complete server.
up
4
jeff_graham at datacenterservices dot net
20 years ago
As stated within the note "jimo at mail dot azhsv dot com
29-Nov-2003 04:33
PHP 4 and IIS 6.0 (Windows Server 2003)," I found the same steps were requiered for installation of PhP 5 beta 3 on my Windows 2003 server (Standard Edition)
up
4
Meiki67 skipthis at geemail
16 years ago
Had a hard day to MSI install 5.2.3 on WinXP with MySQL. I use a drive substitution (subst drive: path - in my case subst d: c:\drive_d) and installed PHP in D:\PHP - which in reality is C:\DRIVE_D\PHP. To make a long story short - only after (1) changing all substituted D:\ back to C:\DRIVE_D and (2) resolving all DOS short names to Win long names PHP started to work. The first one is clear - the substitution works only for the active console user - not for services or IUSR. For the second one I have no explanation, since DOS short names should work systemwide - maybe Win handles them correctly but PHP not ?

BTW <?php phpinfo(); ?> was of tremendeous help

Meiki
up
2
john dot calder at manukau dot ac dot nz
15 years ago
WINDOWS 2003 and IIS. BIG LESSON FOR ME was "don't mess with the optional components".
I had lots of trouble until I tried installing without asking for extras and then it was very smooth.
I have found no need to set up paths.
I have found no need to configure IIS.
I have found no need to change security on the PHP folder.

What works for me with Windows/IIS:

1. You need to be logged-on as "administrator"

2. Run "php-5.2.6-win32-installer.msi"
Your ONLY action during this wizard is to select "IIS ISAPI" as the webserver. Do NOT CHANGE anything else! I am guessing that the optional extras apply only to Apache because after enabling them I see Apache-related error messages.

3. Setup a test virtual directory as you would for an ASP or ASP.NET web app. eg "phptest"
Then use notepad to create a test page eg "test.php"
<?php
phpinfo
();
?>

4. In Internet Explorer, test with eg this address
http://localhost/phptest/test.php

IF this does not give you a beautiful page of details THEN start reading other advice on this page - especially helpful for me was the faq advice to test run "php.exe -i" from the command prompt.
up
2
christianfelix at laszlo dot com
16 years ago
For Windows XP users

Just add php.ini to windows/system 32 and also save a copy in the setup folder e.g. c:/php/php.ini, c:/php5/php.ini,

You have to follow the suggestions, add to path, uncomment extensions and voila!!
up
2
Curtis
16 years ago
I have some additional troubleshooting tips for 53.7, which deals with getting a blank screen on your browser when running a PHP script.

In addition to server misconfiguration, it may also be that PHP isn't configured to output errors to the browser, which is the case if you or your host uses a more secure php.ini. If this is the case, you need to find out where errors are being logged to find out if any errors are preventing normal output from being delivered to the client.

If you have access to php.ini, check the 'display_errors' directive, which is, by default, located under the 'error_reporting' directive. It's helpful to have 'display_errors' on during debugging phases, but best to have it off in production environments.

Related functions: http://php.net/ini_set | http://php.net/error_reporting | http://php.net/error_log
up
1
joerg at fenin dot de
16 years ago
To limit HTTP Request Methods on the Apache server running PHP you should use mod_rewrite or mod_security instead of LimitExcept, to give you more control over the handling of such http errors. Can go in .htaccess file or httpd.conf

# mod_rewrite
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} !^(GET|HEAD|POST)$
RewriteRule .* - [F,L]
</IfModule>

# mod_security
<IfModule mod_security.c>
SecFilterSelective REQUEST_METHOD "!^(GET|HEAD|POST)$" "deny,log,status:403"
</IfModule>

You can use the php request method scanner at askapache to see exactly how your server deals with various request methods, and check that your server is configured properly..

http://www.askapache.com/online-tools/request-method-scanner/
up
1
peter dot mosinskisNOSPAM at csuci dot edu
21 years ago
Running Win2K AS + IIS5.0 + PHP 4.3.1, I ran into a nasty problem that I mistakenly thought had to do with something in the php.ini configuration. When I would try to submit a form using the HTTP method GET it would work, but I would get a "404 Page Not Found" error using the POST method.

All my permissions were set correctly, the php.ini was configured correctly. It had to do with URLScan being installed on IIS (see below)

Page 404 File Not Found Error When Using POST method in PHP (and Perl, and otherwise)
-------------------------------------------

This is related to the Microsoft URLScan utility. If you have this problem, the IIS administrator has probably run the IIS Lockdown tool as well as configured URLScan to reject this type of HTTP method when sent in a URL. These tools are meant to enhance web server security.

URLScan configuration files can be found in the \WINNT\system32\inetsrv\urlscan folder on the web server. Specifically, the file to modify is urlscan.ini.

The changes to make are as follows:
1. Make sure UseAllowVerbs=1 under [options]
2. Under the [AllowVerbs] section, list your allowed HTTP methods to include:
GET
POST

For more information on the IIS Lockdown tool and URLScan, visit http://technet.microsoft.com
up
1
monroe at peoplego dot com
21 years ago
INSTALLATION ON OPENBSD 3.1 VIA PORTS COLLECTION
Would have succeed but no mysql support.
I commented out the FLAVORS+= dbase filepro mysql mysql_bundled postgresql iodbc in the /usr/ports/www/php4/Makefile and in the configure options added
--with-mysql=/usr/local and it worked.

Good Luck
up
0
Anonymous
17 years ago
After setting the PHPRC environment variable, none of my PHP files would hit the preprocessor. The browser was just serving out PHP source code right there in the "view source."

The manual was telling me to set this var to "c:\php," but nothing was working. It's almost as if IIS/Win2000 wasn't reading my php.ini at all.

After I set that variable to "c:\php\php.ini," all of a sudden I was getting honest to goodness PHP pages working.
up
-1
barry dot fagin at usafa dot af dot mil
19 years ago
Fixing 404 (file not found) errors with PHP 5.0.3 and IIS 6.0

IIS 6.0 is installed with security settings that don't permit dynamic content. This means that even if all the hints in the FAQ are paid attention to (.ini modified correctly, security and permissions correct for IUSR_xxx user, etc), you still get 404 errors for all php files.

To fix this: IIS Manager -> expand local computer -> Web Services Extensions -> Add web service or extension -> .php, browse to c:\php\php-cgi.exe or wherever you had the php executable installed. That plus setting the doc_root in the .ini file solved the problem.

--BF
To Top